NB Programmer
NB programmer is for programming flash and debug of AI modules. It has two functions, monitoring uart message and programming flash. User should select either one function before using.

Install drivers

Double click the icon to install driver, select "install" on the left side of window.
Double click the icon to install driver, select "install" on the left side of window.

How to use

here is a video on youtube

1.monitor uart message

  1. 1.
    if you have not installed SER driver, please download and intall.
  2. 2.
    switch S1 to uart side
  3. 3.
    plug in micro usb cable
  4. 4.
    connect J1 to ai module's uart port
  5. 5.
    connect to pc

1.1 uart configuration

  • Bitrate:115200
  • Data bits:8
  • Parity: none
  • Stop bits:1
  • Flow control:none

2.Flash programming

  1. 1.
    if you have not installed PAR driver,please download and install
  2. 2.
    switch S1 to SPI side
  3. 3.
    plug in micro usb cable
  4. 4.
    connect J1 to ai module's spi programming port
  5. 5.
    connect to pc
  6. 6.
    open Wallaby.exe tool
  7. 7.
    drag .nbf file to Wallaby.exe first input text field and select Gother, then press write button, the tool will start programming flash and verify it